VHF/UHF Portable Repeaters
With Power & Versatility
Portable Communications Where it's Needed
The TRP-8000 is built, using only the best radio equipment & World-Class Sinclair Duplexers - built inside a Genuine 40MM US "Ammunition Can" that provides robust protection from dust, dirt, corrosion and most importantly, interference from outside sources. In fact, the TRP-8000 provides more overall protection than any other commercially available product on the market today!
BASIC, UTILITARIAN FRONT FACING PANELS
ULTRA RUGGED DESIGN INTERNALLY & EXTERNALLY
SOLAR POWER COMPATIBLE !
POWERFUL 25 WATTS OF PORTABLE RADIO POWER !
CHASSIS MOUNTED ANTENNA OR OPTIONAL EXTERNAL
BUILT IN A US MILITARY AMMUNITION CASE
WATERTIGHT & DUST-PROOF
ANTENNA & VSWR CIRCUIT PROTECTION
DC POLARITY PROTECTION
PROVIDES -90DB NOISE ATTENUATION
POWER AND POLARITY ERROR INDICATORS
DIGITAL VOLTAGE INDICATOR
VARIABLE RF POWER 5 TO 25 WATTS
136-174Mhz VHF 400-460Mhz UHF
VSWR PROTECTION (INCLUDED)
REVERSE POLARITY PROTECTION (INCLUDED)
LIGHTENING PROTECTION (OPTIONAL)
MAY BE USED AS A COMMAND STATION
EXTERNAL OR ATTACHED MOUNTED ANTENNA
CTCSS / DCS TONE ENCODING
CW STATION IDENTIFICATION
VARIABLE SQUELCH TAIL
OPTIONAL PHONE PATCH
GENUINE SINCLAIR DUPLEXER - CUSTOM TUNED 5MHZ SPLIT VHF/UHF
DUPLEXER MOUNTED ON RUBBER SHOCKS TO ABSORB VIBRATION
5 TO 25 WATTS OF RF POWER
SOLAR COMPATIBLE - 12 Volts DC battery
Sinclair Duplexer VHF 136-174 Mhz UHF 400-460 Mhz 5 Mhz offset between TX/RX
Maximum desense .08Dbm @ 20 Watts
Maximum Insertion Loss: 1.2 Dbm
MINIMAL current draw: 100ma draw on standby / 2.2Amps on Transmit (15 watts)
Reverse Polarity Protection using Texas Instruments regulator board
Reverse VSWR Protection - Protects against poor antenna or High SWR
With the introduction of our newest product, the TRP-8000P, this combo portable / fixed station repeater combines the ruggedness and practicality of a portable system with all the benefits of a high power, high performance "fixed" repeater all-in-one.
Patterned after a fixed station design, we built the TR8000P inside a Pelican 1600 case on industry standard aluminum 19" rack-mount rails that include the Transmit & Receive modules, 6 Cavity duplexer and 12 Volt power-supply, all within easy reach of the operator.
This extremely flexible design features front panel duplexer tuning, field programing and portability.
Designed with portability in mind, the mount rails are built on shock resistant rubber, and each connection outlet is sealed through the bulkhead with O-Rings to ensure a watertight enclosure. All screws are stainless steel, while the mounted hardware is affixed using high quality Brass screws.
External connections are easily accessed through the side of the case and include power and RF connections using "N" type connectors.
TX & RX Modules TAIT TM-8000
136-172 Mhz VHF/450-480 Mhz UHF
TX: 5 Watts - 25 Watts Output
Current:Stby 135ma / TX 2.2Amps
Duplexer: Comprod 66-13-XX
T/R Reject 4-12 Mhz @ -110Dbm
Desense: Less than 1Db @ 25 Watts
Insertion Loss Less than 2 Dbm
For more information on this or any other system, please contact Timberline Radio Systems Ltd. @ +1-604-290-3915